"Performed diagnostic on the unit. The customer reported that oven not turning on. Upon inspection, I performed igniter test. The results showed that bake igniter faulty. The issue occurred due to wear and tear. In order to resolve the problem, the following repair is needed: replace bake igniter. The customer approved the repair during this visit, and the required part was installed successfully. After installation, I performed functional testing to confirm the repair. The unit is now operating as designed. This repair resolves the previously identified issue. ; used 1 IG9998 (SPARK MODULE / IGNITER) from stock"

"Performed a diagnostic on the unit. The customer reported that the dishwasher was not starting. Upon inspection, I performed a control board test. The results showed that the control was unresponsive. The issue occurred due to wear and tear. In order to resolve the problem, the following repair is needed: replace the control board. The total cost for the repair exceeds the cost of a new unit. Recommend replacement unit.

"Performed a diagnostic on the unit. The customer reported that the dryer was not stopping. Upon inspection, I performed a timer test. The results showed that the timer was out of sequence. The issue occurred due to wear and tear. In order to resolve the problem, the following repair is needed: replace the timer. Repair is not cost-effective, and the problem is not mechanically detrimental to the unit. Suggest turning off the buzzer.

"Performed a diagnostic on the unit. The customer reported that the cooktop does not turn on. Upon inspection, I performed a keypad test. The results showed that intermittently responsive. The issue occurred due to wear and tear. In order to resolve the problem, the following repair is needed: replace the keypad.

"Performed a diagnostic on the unit. The customer reported that the dryer was not heating. Upon inspection, I performed a heating element test. The results showed that the wires to the heating element were severed. The issue occurred due to wear and tear. In order to resolve the problem, the following repair is needed: rewire the harness to the element. The customer approved the repair during this visit, and the required rewire was performed successfully. After rewire, I performed functional testing to confirm the repair. The unit is now operating as designed. This repair resolves the previously identified issue."