Performed diagnostics on the unit. The customer reported that the wine refrigerator displayed a high temperature. Upon inspection, I performed a compressor winding test. The results showed that the compressor was out of spec. The issue occurred due to wear and tear. In order to resolve the problem, the following repair is needed: replace the compressor, filter dryer, and heat exchanger. The total cost for the repair exceeds the cost of a new unit. Recommend replacing unit.

"Performed a diagnostic on the unit. The customer reported that the ice maker is not working. Upon inspection, I performed a diagnostic cycle on the ice maker. The results showed that it cycles through, and the water supply is good for the unit. The issue occurred due to the ice maker being off for a long time.To resolve the problem, the following repair is needed: a quick rest for the ice maker. Allow 24-48 hours to make ice. If not making ice, you will need to replace the icemaker."

"Returned to complete the repair on the unit after the initial diagnosis. The required evaporator fan cover assembly was installed successfully. After installation, I performed functional testing to confirm the repair. The unit is now operating as designed. This repair resolves the previously identified issue of not being cold enough and ice forming."

"Performed diagnostic on the unit. The customer reported that ice buildup in refrigerator. Upon inspection, I performed airflow system test. The results showed that evaporator fan and cover assembly faulty . The issue occurred due to wear and tear. In order to resolve the problem, the following repair is needed: replace evaporator fan and cover assembly. The total cost for the repair is $595.26.; ordrng 1 WR17X28923 (EVAP FAN MOTOR AND DAMPER ASSM)"

"Performed a diagnostic on the unit. The customer reported that the dryer was not heating. Upon inspection, I performed a gas coil test. The results showed that coils were out of spec. The issue occurred due to wear and tear. In order to resolve the problem, the following repair is needed: replace the gas coils. The customer approved the repair during this visit, and the required parts were installed successfully. After installation, I performed functional testing to confirm the repair. The unit is now operating as designed. This repair resolves the previously identified issue.; used 1 279834 (COIL-VALVE) from stock."